LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Keyless Ignition Node (Kin) >> Installation

Module, Keyless Ignition Node (Kin): Installation

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0144691Courtesy of CHRYSLER GROUP, LLC
  1. Push the Keyless Ignition Node (KIN) into the instrument panel until it snaps into place.
  2. Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector.
  3. Install the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals