LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Integrated Center Stack (ICSM) >> Installation

Module, Integrated Center Stack (ICSM): Installation

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0170770Courtesy of CHRYSLER GROUP, LLC
  1. Position the Integrated Center Stack (ICS) to the bezel panel and install the fasteners (1).
    GC0170795Courtesy of CHRYSLER GROUP, LLC
  2. Connect the wiring harness connector (1) to the back of the ICS and snap the ICS back into the installed position.
    GC0170863Courtesy of CHRYSLER GROUP, LLC
  3. Align the storage bin (1) and push in to engage the two retaining clips.
  4. Install the fasteners (2) and tighten securely.
  5. Install the transmission shifter. Refer to SHIFTER, TRANSMISSION, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals