Module, Electric Power Steering (EPS): Description

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

This vehicle features an Electric Power Steering (EPS) system. The EPS module is located in a powerpack that contains the motor, module and worm drive on the steering gear assembly. Since the steering system is fully electric rather than traditional hydraulic, all of the power assist is provided via an electric motor system. This type of EPS system improves:

Fuel economy since there is no parasitic loss from a power steering pump.
Reduces steering system-generated noise.
Allows for optimal tuning of feedback to the driver.

NOTE:

All diagnostics must be performed through the EPS module for the EPS system. There are no serviceable parts inside the steering rack, EPS module or the EPS motor. If the EPS assembly is replaced, a verification test must be performed. Refer to EPS VERIFICATION TEST .

For the removal of the EPS module. Refer to GEAR, REMOVAL .

For installation of the EPS module. Refer to GEAR, INSTALLATION .