LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Anti-Lock Brake System (Abs) >> Removal

Module, Anti-Lock Brake System (Abs): Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. To replace the Antilock Brake System (ABS) module, the Integrated Control Unit (ICU) assembly must be removed. Refer to INTEGRATED CONTROL UNIT (ICU), REMOVAL .
  2. Remove the fasteners attaching the mounting bracket to the Hydraulic Control Unit (HCU) and remove the bracket.
    GC0170098Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (3) attaching the ABS module (1) to the HCU.
    GC0170199Courtesy of CHRYSLER GROUP, LLC
  4. Separate the ABS module (1) from the HCU (2).
scientia non olet · About LEMON Manuals