LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Active Damping Control (ADCM) >> Installation

Module, Active Damping Control (ADCM): Installation

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0152157Courtesy of CHRYSLER GROUP, LLC
  1. Slide the Active Damping Control Module (ADCM) (1) into position making sure the latches secure the ADCM.
  2. Install the retaining screws (2) and tighten to 9 N.m (80 in. lbs.).
  3. Connect the wire harness connectors to the ADCM (1).
  4. Position the carpet back in the original location and install the fasteners.
  5. Connect the negative battery cable. Refer to CABLES, BATTERY, INSTALLATION .
  6. Perform the ADCM VERIFICATION TEST .
scientia non olet · About LEMON Manuals