LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Battery (Service Information)) >> Retainer, Battery >> Installation

Retainer, Battery: Installation

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0192457Courtesy of CHRYSLER GROUP, LLC
  1. Install the battery holddown clamp (2) and bolt (1). Tighten the bolt to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the negative battery cable to the Intelligent Battery Sensor (IBS) M8 stud and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Install the rear compartment floor trim panel.
scientia non olet · About LEMON Manuals