LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Cherokee Trailhawk, 3.2L Eng VIN X >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows (Service Information) >> Motor, Window Regulator >> Removal

Motor, Window Regulator: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the door interior trim panel or. Refer to PANEL, DOOR TRIM, REMOVAL . For the appropriate procedure. Refer to PANEL, REAR DOOR TRIM, REMOVAL .
    GC0147660Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the power window motor electrical connector (3).
  4. Remove the fasteners (2) that secure the power window motor and gear assembly (1) to the carrier plate and remove the motor and gear assembly.
scientia non olet · About LEMON Manuals