Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

Place the left and right stabilizer bar bushings and retainers on the stabilizer bar (2).
Position the stabilizer bar (2) to the frame. Ensure the bar is centered with equal spacing on both sides.
Install four NEW stabilizer bar bolts (1) but do not tighten at this time.
Connect both stabilizer bar links in to the stabilizer bar. Refer to LINK, STABILIZER BAR, REMOVAL AND INSTALLATION .
If equipped, connect the height sensor rod.
Remove the support and lower the vehicle.
Tighter the four stabilizer bar bolts (1) to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
Once the initial torque has been applied to the four stabilizer bar bolts (1) and the stabilizer bar bushings have been compressed, the four stabilizer bar bolts (1) MUST be torqued a second time to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .