Removal And Installation: Installation
- Position the radio near the instrument panel.
- Connect the antenna cables and radio wire harness connectors.
- Position the radio into the instrument panel.
- Install and securely tighten the four screws securing the radio to the instrument panel.
- Install the radio trim bezel to the instrument panel.
- Install the two screws for the radio trim bezel and tighten securely.
- Install the center trim panel to the instrument panel. Refer to PANEL, INSTRUMENT PANEL TRIM, REMOVAL AND INSTALLATION .
- Connect the negative battery cable(s). Refer to STANDARD PROCEDURE .
Uconnect® Access Applications and WiFi hotspot will be automatically updated in the replacement radio through the radio's embedded cellular phone based on the customers present subscription status. This update process may take up to an hour, depending upon the number of apps and adequate cellular services accessibility. The dealer is not expected to perform this process or to oversee it, but may need to explain to the vehicle owner or operator that some features and applications may not be fully restored and overall system response may be slowed until the process has completed.
Any factory replacement radio for the same vehicle will be provided with the Navigation system already activated. Refer to the Navigation/Telecommunication article for more information. Refer to DESCRIPTION AND OPERATION .