(Occupant Classification Module (OCM) - Electrical Diagnostics)

• Diagnostic Code Index
• DTC Troubleshooting
  • B0052-01-Passenger SEATBELT Sensor-General Electrical Failure
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-13-Passenger SEATBELT Tension Sensor-Circuit Open
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-16-Passenger SEATBELT Tension Sensor-Circuit Voltage Below Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-17-Passenger SEATBELT Tension Sensor-Circuit Voltage Above Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-2A-Passenger SEATBELT Tension Sensor-Stuck
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1B9D-00-Bladder Fluid Level Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1BA8-00-System Out Of Calibration/Not Calibrated
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1C31-00-Occupant Classification Calibration Range Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B2206-00-Current VIN Missing-Mismatch
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B2212-00-Occupant Classification Module Internal
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B222A-00-Vehicle Line Mismatch
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C212A-16-System Voltage-Circuit Voltage Below Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C212A-17-System Voltage-Circuit Voltage Above Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0001-00-High Speed Can Communication Bus
  • U0002-00-Can C Bus Off Performance
  • U0140-00-Lost Communication With Body Control Module
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U0151-00-Lost Communication With Occupant Restraint Controller
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
• Standard Procedure
  • Occupant-Classification Module Intermittent Test
    • Notes
    • Diagnostic Intermittent Test
  • Restraints-System-Pre-Diagnostic-Procedure
    • Notes
    • Diagnostic Pre-Test
  • OCM System Verification Test (Empty Seat Relearn Procedure)
    • OCM System Verification Test (OCM Relearn Procedure)
  • Occupant Classification Module (OCM) Verification Test
    • Diagnostic Verification Test