LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade Upland >> Repair and Diagnosis >> External Pages >> Different car >> Section 838 (Electronic Control Modules (Service Information)) >> Module, Radio Receiver >> Module Programming >> Program The Radio

Program The Radio

WARNING: This page is about a different car, the 2018 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn the ignition OFF, then ON and confirm DTCs are gone.
  5. Go to BCM >> Misc. Functions >> Proxy Alignment.

If required, continue to programming the next module.

scientia non olet · About LEMON Manuals