LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade Upland >> Repair and Diagnosis >> External Pages >> Different car >> Section 752 (Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal >> 2.2L Diesel

2.2L Diesel

WARNING: This page is about a different car, the 2018 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover. .
  3. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  4. Drain the cooling system. Refer to STANDARD PROCEDURE .
    GC0162262Courtesy of CHRYSLER GROUP, LLC
  5. Remove the clip and the Engine Cooling Temperature (ECT) sensor (1) from the thermostat housing.
    GC0162349Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the (ECT) sensor wire harness connector (1).
scientia non olet · About LEMON Manuals