LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade Upland >> Repair and Diagnosis >> External Pages >> Different car >> Section 752 (Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.0L Diesel

2.0L Diesel

WARNING: This page is about a different car, the 2018 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159853Courtesy of CHRYSLER GROUP, LLC
  1. Install the Engine Cooling Temperature (ECT) sensor (2) to cylinder head. and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the ECT sensor wire harness connector (1).
  3. Install the engine cover. .
  4. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals