LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Electronic Control Modules (Service Information)) >> Module, Radio Receiver >> Installation

Module, Radio Receiver: Installation

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
GC0160268Courtesy of CHRYSLER GROUP, LLC
  1. Connect the antenna connectors.
  2. Connect the radio electrical connectors.
  3. Insert the radio into the instrument panel and engage the inner retaining clips (1).
  4. Connect the negative battery cable.
NOTE:

The radio must be programmed after a radio replacement. Refer to STANDARD PROCEDURE .

scientia non olet · About LEMON Manuals