Sensor, Oxygen: Installation
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oxygen sensor (3). Tighten sensor to 50 N.m (37 ft. lbs.).
- Connect the oxygen sensor wire harness connector (3).
- Install the EGR cooler. Refer to COOLER, EXHAUST GAS RECIRCULATION (EGR), INSTALLATION .
- Connect the negative battery cable.