LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, HVAC >> Installation >> Installation - LHD

Installation - LHD

GC0184558Courtesy of CHRYSLER GROUP, LLC
  1. Position the HVAC module to the HVAC housing.
  2. Install the two screws (2) that secure the HVAC module to the HVAC housing and tighten securely.
  3. Connect the wire harness connectors (1) to the HVAC module.
  4. Install the passenger side instrument panel silencer.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  6. Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals