Module, Air Suspension Control (ASCM): Removal

Courtesy of CHRYSLER GROUP, LLC

1. Position the LF seat to its full forward position.
2. Disconnect and isolate the negative battery cable. Refer to CABLES, BATTERY, REMOVAL .
3. From behind/under the LF seat, remove the cover panel from the electronic module tub (4) to access the Air Suspension Control Module (ASCM) (2).
4. Disconnect the wire harness connectors from the ASCM (2).
5. Release the integral latches that secure the ASCM (2) to the mounting bracket and slide the module upward to remove from the vehicle.