LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Trackhawk >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Fuel Pump Control >> Removal

Module, Fuel Pump Control: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the rear seat. Refer to SEAT, FRONT, REMOVAL .
  3. Remove the rear carpet assembly. Refer to CARPET, FLOOR, REMOVAL .
    GC0180925Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the fuel pump control module wire harness connectors (2) from the module.
  5. Remove the fuel pump control module bracket mounting nuts(1).
  6. Remove the fuel pump control modules from the mounting bracket.
scientia non olet · About LEMON Manuals