Module, Drivetrain Control (DTCM): Removal

Courtesy of CHRYSLER GROUP, LLC

1. Position the left front seat to its full forward position.
2. Disconnect and isolate the negative battery cable, for battery location and disconnect procedure. Refer to CABLES, BATTERY, REMOVAL .
3. Remove the cover panel from the electronic module tub (4) to access the Drive Train Control Module (DTCM) (3).
4. Disconnect the body wire harness connector from the module connector receptacle.
5. Release integral latches that secures the module to the mounting bracket and slide the module upward.
6. Remove the module from the vehicle.