Engine Block: FLEXPLATE: Installation
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the flexplate (1) onto the crankshaft and install the bolts finger tight.
- Using the sequence shown in the illustration, tighten the flexplate retaining bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .CAUTION:
Do not use an impact socket or a thick walled socket when removing or installing the flexplate retaining bolts, damage to the crankshaft, internal engine or the transmission may occur.
- Install the transmission. Refer to appropriate service information.