Engine Block: FLEXPLATE: Installation
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the flexplate (3) onto the crankshaft.
- Install the spacer (2) and the bolts (1) hand tight.
- Using a criss-cross pattern, tighten the flexplate to crankshaft retaining bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .CAUTION:
Do not use an impact socket or a thick walled socket when removing or installing the flexplate retaining bolts, damage to the crankshaft, internal engine or the transmission may occur.
- Install the transmission.