Technical Specifications: Specifications
NOTE:
Rotor runout specifications are not to be used for diagnosing brake concerns. The values in the table are post turn measurements taken by an on-vehicle brake lathe.
NOTE:
When refacing a rotor, the required rotor runout MUST BE MAINTAINED. Extreme care in the operation of rotor turning (machining) equipment is required.
LIMITS/SPECIFICATIONS - 17 INCH BRAKES (BASE)
| Brake Rotor | Rotor Thickness | Minimum Rotor Thickness | Rotor Runout |
|---|---|---|---|
| Front | 32 mm 1.26 in. |
30.5 mm 1.200 in. |
.020 mm .0008 in. |
| Rear | 14 mm .55 in. |
12.5 mm .492 in. |
.020 mm .0008 in. |
LIMITS/SPECIFICATIONS - 18 INCH BRAKES (PREMIUM)
| Brake Rotor | Rotor Thickness | Minimum Rotor Thickness | Rotor Runout |
|---|---|---|---|
| Front | 32 mm 1.26 in. |
30.5 mm 1.200 in. |
.020 mm .0008 in. |
| Rear | 22 mm .87 in. |
20.5 mm .807 in. |
.020 mm .0008 in. |
LIMITS/SPECIFICATIONS - SRT8
| Brake Rotor | Rotor Thickness | Minimum Rotor Thickness | Rotor Runout |
|---|---|---|---|
| Front | 34 mm 1.34 in. |
32 mm 1.259 in. |
.020 mm .0008 in. |
| Rear | 28 mm 1.10 in. |
26 mm 1.02 in. |
.020 mm .0008 in. |
LIMITS/SPECIFICATIONS - TRACKHAWK
| Brake Rotor | Rotor Thickness | Minimum Rotor Thickness | Rotor Runout |
|---|---|---|---|
| Front | 36 mm 1.41 in. |
34 mm 1.34 in. |
.020 mm .0008 in. |
| Rear | 28 mm 1.10 in. |
26 mm 1.02 in. |
.020 mm .0008 in. |