Fan, Cooling: Installation: 3.6L/5.7L/6.4L

Courtesy of CHRYSLER GROUP, LLC

If removed, install the upper shroud cover (1). Apply pressure downwards until the cover snaps into place past clips (2).
Install cooling fan assembly into vehicle.
Guide the fan/shroud cover assembly into position between the radiator and upper core support.

Courtesy of CHRYSLER GROUP, LLC
Position cooling fan assembly onto the mounts (3) located on the radiator.
Lock in the fan (1) assembly into place by pressing down firmly on the shroud till the locks (3) engage.
If equipped, install the lower engine cover.
Lower vehicle.
Connect electric fan electrical connector (2).
If removed, install the throttle body assembly. Refer to THROTTLE BODY, INSTALLATION .
Install the air intake assembly.
Connect negative battery cable.
Start engine and check fan operation.