LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Laredo, AWD, Full Time T/Case Control >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal >> Bank 1

Bank 1

GC0170121Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the left side engine cover (1).
    GC0170459Courtesy of CHRYSLER GROUP, LLC
  3. Clean the area around the Temperature and Manifold Absolute Pressure (TMAP) sensor (3).
  4. Disconnect the TMAP sensor wire harness connector (2).
  5. Remove the screw (1) and the TMAP sensor (3).
scientia non olet · About LEMON Manuals