LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Laredo, AWD, Full Time T/Case Control >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Installation >> Throttle Outlet

Throttle Outlet

GC0170326Courtesy of CHRYSLER GROUP, LLC
  1. Check condition of the Temperature and Manifold Absolute Pressure (TMAP) sensor O-ring seal.
  2. Clean the sealing area on the supercharger.
  3. Lubricate the TMAP sensor O-ring seal with clean engine oil.
  4. Install the TMAP sensor (1) into the supercharger. Tighten the screw (2) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  5. Connect the TMAP sensor wire harness connector (3).
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals