LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Laredo, AWD, Full Time T/Case Control >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Installation

Sensor, Accelerator Pedal Position: Installation

GC0080493Courtesy of CHRYSLER GROUP, LLC
  1. Install the accelerator pedal assembly (3) and securely tighten the fasteners (2).
  2. Connect the accelerator pedal position sensor wiring connector (1).
  3. Install the drivers lower dash board close out panel.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals