Charging System (Service Information): Generator: Installation: 3.6L

Courtesy of CHRYSLER GROUP, LLC

Install the generator into the vehicle.
Install the three mounting retainers.
Tighten to 25 N.m (18 Ft. Lbs.).
Install ground wire on mounting stud (4).
Install the lower front ground wire mounting nut (5).
Tighten to 24 N.m (18 Ft. Lbs)
Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC
Install the B+ terminal to the generator stud.
Tighten to 17 N.m (150 In. Lbs.).
Plug in the field circuit to the generator.
Connect the negative battery cable.