Outlet, Power, Universal Serial Bus: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Install the power USB outlet (1) into floor console rear trim panel (2) and engage the outlet retainers.
2. Connect the wire harness connectors.

   Courtesy of CHRYSLER GROUP, LLC

3. Install the floor console rear duct (2) and the fasteners (1) that secure the floor console rear duct to the floor console rear trim panel. Tighten the fasteners securely.

   Courtesy of CHRYSLER GROUP, LLC

4. Install the floor console rear trim panel (1) to the floor console.
5. Connect the negative battery cable.