LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 8HP50/850RE Automatic Transmission (Service Information) >> Valve, Coolant Control >> Removal

Valve, Coolant Control: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Drain the coolant system. Refer to STANDARD PROCEDURE .
  3. Remove the cowl extension silencer. Refer to SILENCER, COWL EXTENSION, REMOVAL .
    GC0173572Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the coolant control valve wire harness connector (1).
  5. Remove the coolant lines (2) from the coolant control valve.
    GC0173692Courtesy of CHRYSLER GROUP, LLC
  6. Remove the coolant control valve bracket bolt (3) located near the right side ignition capacitor (1). Remove the coolant control valve and bracket assembly (2) from the vehicle.
scientia non olet · About LEMON Manuals