LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Front Suspension & Wheel Alignment) >> Front >> Link, Stabilizer Bar >> Installation

Link, Stabilizer Bar: Installation

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Ensure that the stabilizer link nuts are equipped with an encapsulated washer nut assembly upon installation. 

GC0173569Courtesy of CHRYSLER GROUP, LLC
  1. Position the stabilizer link (6) to the vehicle.
  2. Install a NEW  stabilizer link upper nut and tighten to 115 N.m (85 ft. lbs.).
  3. Install a NEW  stabilizer link lower nut (4) and tighten to 122 N.m (90 ft. lbs.).
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals