Sensor, Differential Pressure: Removal: 6.4L
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Raise and support vehicle.
- If equipped, remove the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION .
- If required, remove the Differential Pressure Sensor (DPS) metal tubing fitting (4).
- Disconnect the DPS electrical connector (2).
- Disconnect the DPS hose (3).
- Remove the bolt (1) with the DPS.
- Remove the DPS from the bracket.