Cable, Shift: Adjustments: Verification
- Place gearshift lever in Park (P).
- Attempt to move vehicle by rocking back and forth on level ground. If vehicle does not move, attempt to start engine. If engine starts, the park position is correct.
- Depress and hold the brake pedal.
- Turn key to on/run and place gearshift lever in Neutral (N).
- Attempt to start engine. If engine starts in both Neutral (N) or Park (P), gearshift cable is adjusted properly. No adjustment is required.
- If engine does not start in either Park (P) or Neutral (N), perform adjustment procedure. Refer to SHIFTER CABLE ADJUSTMENT .