LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Compass Trailhawk >> Repair and Diagnosis >> Transmission >> Transfer Case >> Power Transfer Unit (Service Information) >> Actuator, Shift >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the actuator on the PTU and tighten the bolts to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the actuator wire harness connector.
  3. Install the right front tire and wheel assembly. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals