LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Compass Trailhawk >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Switch, Ignition >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the ignition switch with steering lock to the steering column.
  2. Install the NEW  bolts and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
    NOTE:

    The head of the bolt is designed to snap off. Once the bolt is torqued to the proper specification, you will need to break the head of the bolt off.

  3. Install the steering column. Refer to COLUMN, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals