Removal And Installation: 2.4L: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the starter and install the upper starter retaining bolt (1). Tighten the bolt to the proper specification. Refer to TORQUE SPECIFICATIONS  .
2. Position the gear selector cable retaining bracket (2), then install and securely tighten the bracket bolt (2).

   Courtesy of CHRYSLER GROUP, LLC

3. Install the lower starter bolt (1) and tighten the bolt to the proper specification. Refer to TORQUE SPECIFICATIONS  .
4. Connect the starter wire harness connector (2).
5. Position the B+ electrical connection to the starter, then install and securely tighten the nut (3).
6. Install the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
7. If equipped with All Wheel Drive (AWD), install the Power Transfer Unit (PTU). Refer to REMOVAL AND INSTALLATION .
8. If equipped with Front Wheel Drive (FWD), install the intermediate shaft. Refer to WITH INTERMEDIATE SHAFT and REMOVAL AND INSTALLATION .
9. Install the battery tray and battery. Refer to TRAY, BATTERY, REMOVAL AND INSTALLATION .
10. Remove the support and lower the vehicle.