LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Compass High Altitude, 4WD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate (Service Information) >> Switch, D-Pillar >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0178937Courtesy of CHRYSLER GROUP, LLC
  1. Seat the liftgate switch (2) into the quarter trim panel until all of the switch retaining clips (3) are engaged.
  2. Connect the power liftgate switch wiring harness connector (1).
  3. Install the left quarter trim panel. Refer to INSTALLATION
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals