LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Cherokee Trailhawk, 3.2L Eng VIN X >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control >> Exhaust Gas RECIRCULATION >> Sensor, EGR Temperature >> Removal

Sensor, EGR Temperature: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the air cleaner hose assembly. For 2.0L, refer to REMOVAL . For 2.4L, refer to REMOVAL .
    GC0187082Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the EGR temperature sensor wire harness connector (1).
  4. Remove the EGR temperature sensor (2).
scientia non olet · About LEMON Manuals