LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Cherokee Trailhawk, 2.0L Eng VIN N >> Repair and Diagnosis >> Engine Performance >> 2.0L Ignition System (Service Information) >> Capacitor, Ignition >> Installation

Capacitor, Ignition: Installation

GC0186553Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition capacitor (2) with the nut (1) tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    GC0187210Courtesy of CHRYSLER GROUP, LLC
  2. Connect the ignition capacitor wire harness connector (1).
  3. Install the top engine cover. z COVER, ENGINE, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals