LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Cherokee Trailhawk, 2.0L Eng VIN N >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Hands Free Liftgate >> Removal >> Module

Module, Hands Free Liftgate: Removal: Module

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the rear bumper lower fascia. Refer to FASCIA, REAR, UPPER, REMOVAL .
    GC0186771Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connectors (1) from the Hands Free Entry (HFE) liftgate module (3).
  4. Remove the fastener (2) securing the HFE liftgate module (3) to the HFE sensor bracket.
  5. Remove the HFE liftgate module from the vehicle.
scientia non olet · About LEMON Manuals