LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Cherokee Altitude, 3.2L Eng VIN X, 4WD, Automatic T/Case Control >> Repair and Diagnosis >> Engine Performance >> 2.4L & 3.2L Ignition System (Service Information) >> Plug, Glow >> Installation

Plug, Glow: Installation

GC0170037Courtesy of CHRYSLER GROUP, LLC
  1. Install the glow plug(s) (1). Tighten the glow plug(s) to the proper torque specification. Refer to TORQUE SPECIFICATION .
    GC0169960Courtesy of CHRYSLER GROUP, LLC
  2. Connect the glow plug wire harness connector (1).
  3. Install engine cover. Refer to the appropriate information.
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals