LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Cherokee Altitude, 3.2L Eng VIN X, 4WD, Automatic T/Case Control >> Repair and Diagnosis >> Engine Performance >> 2.4L & 3.2L Ignition System (Service Information) >> Module, Glow Plug >> Removal

Module, Glow Plug: Removal

GC0146750Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Disconnect the two glow plug wire harness connectors (3).
  3. Remove the nut (1) and the glow plug module (2).
scientia non olet · About LEMON Manuals