LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Cherokee Altitude, 3.2L Eng VIN X, 4WD, Automatic T/Case Control >> Repair and Diagnosis >> Engine Performance >> 2.4L & 3.2L Ignition System (Service Information) >> Module, Glow Plug >> Installation

Module, Glow Plug: Installation

GC0146750Courtesy of CHRYSLER GROUP, LLC
  1. Install the glow plug module (2) and securely tighten the retaining nut (1).
  2. Connect the Glow Plug Module wire harness connectors (3).
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals