LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Cherokee Altitude, 2.4L Eng VIN B, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 2.4L & 3.2L Cooling System >> Engine >> Radiator, Engine Cooling >> Removal >> 3.2L

Radiator, Engine Cooling: Removal: 3.2L

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
    GC0186670Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the lower radiator hose (1).
  4. Remove the cooling fan. Refer to FAN, COOLING, REMOVAL .
    GC0186661Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The transmission oil cooler lines do not need to be disconnected.

  5. Remove the bolts (1) and position aside the transmission cooler (2).
    GC0187061Courtesy of CHRYSLER GROUP, LLC
  6. Remove the bolt (1) securing the A/C service port bracket to the condenser.
    GC0187066Courtesy of CHRYSLER GROUP, LLC
  7. Remove the three bolts (1) securing the condenser to the radiator.
  8. Separate the condenser from the radiator and position aside.
    GC0187214Courtesy of CHRYSLER GROUP, LLC
  9. Remove the two bolts (1) and the upper left side radiator mount cover (2).
  10. Remove the two bolts (1) and the upper right side radiator mount cover (2).
    GC0186735Courtesy of CHRYSLER GROUP, LLC
  11. Pull the radiator forward releasing the isolators (1) from the mount and remove the radiator (2).
scientia non olet · About LEMON Manuals