LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Wrangler JK Sahara, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Front >> Link, Stabilizer Bar >> Removal

Link, Stabilizer Bar: Removal

GC0130319Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle.
  2. Remove the left upper stabilizer bar link nut (1) from the stabilizer bar.
  3. Remove the left lower stabilizer bar link bolt (4) to the axle.
    GC0130328Courtesy of CHRYSLER GROUP, LLC
  4. Remove the right upper stabilizer bar link nut (2) from the stabilizer bar.
  5. Remove the right lower stabilizer bar link bolt (4) to the axle.
  6. Remove the stabilizer link (1).
scientia non olet · About LEMON Manuals