LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Wrangler JK Sahara, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Module, Totally Integrated Power (TIPM) >> Removal

Module, Totally Integrated Power (TIPM): Removal

GC0130286Courtesy of CHRYSLER GROUP, LLC
NOTE:

Left hand drive gasoline engine shown, left hand drive diesel similar. Right hand drive gasoline and diesel similar with the battery and related components packaged on the left side of the engine compartment.

  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Release the Totally Integrated Power Module (TIPM) cover retaining clips (1) and open the TIPM cover.
  4. Remove the TIPM positive cable retaining nut (2) and remove the cable (4) from the stud.
    GC0130867Courtesy of CHRYSLER GROUP, LLC
  5. Depress the four mounting clips to disengage and remove the TIPM housing (1) from its mounting bracket (4).
  6. Disconnect each of the seven TIPM wire harness connectors.
  7. Remove the TIPM from the vehicle.
scientia non olet · About LEMON Manuals