LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 751 (Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.2L Diesel

2.2L Diesel

WARNING: This page is about a different car, the 2018 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0162349Courtesy of CHRYSLER GROUP, LLC
  1. Connect the Cooling Temperature (ECT) sensor wire harness connector (1).
    GC0162262Courtesy of CHRYSLER GROUP, LLC
  2. Using a NEW  O-ring seal, install the ECT sensor (1) into thermostat housing and push down on spring retainer to lock in place.
  3. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  4. Install the engine cover. .
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals