LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Installation

Sensor, Accelerator Pedal Position: Installation

WARNING: This page is about a different car, the 2017 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0080493Courtesy of CHRYSLER GROUP, LLC
  1. Install the accelerator pedal assembly (3) and securely tighten the fasteners (2).
  2. Connect the accelerator pedal position sensor wiring connector (1).
  3. Install the drivers lower dash board close out panel.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals