LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Steering System) >> Pump >> Removal >> Diesel Engine

Diesel Engine

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before proceeding, refer to WARNING .

  1. Siphon as much fluid as possible from the power steering fluid reservoir.
  2. Remove the engine appearance cover.
    Fig 1: Pressure Line
    GC0082522Courtesy of CHRYSLER GROUP, LLC
  3. Remove the pressure hose routing bracket bolt (2) to the upper mount (7).
  4. Remove the pressure hose (3) at the pump pressure port (4).
    Fig 2: Supply Hose
    GC0082523Courtesy of CHRYSLER GROUP, LLC
  5. Remove the hose clamp (3) securing the supply hose (1) at the pump.
  6. Remove the supply hose (1) from the pump (2).
    Fig 3: Power Steering Pump - Diesel
    GC0082524Courtesy of CHRYSLER GROUP, LLC
  7. Remove the drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  8. Remove the two pump mounting bolts (1) through the pulley (2) openings.
    Fig 4: Third Mounting Bolt - Diesel
    GC0082525Courtesy of CHRYSLER GROUP, LLC
  9. Remove the rear pump mounting bolt (2) behind the pump (1).
  10. Remove the power steering pump (1).