LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Theft Security (Service Information) >> Module, Intrusion >> Installation

Module, Intrusion: Installation

GC0146812Courtesy of CHRYSLER GROUP, LLC
  1. Position the intrusion transceiver module (ITM) (2) into the mount integral to the overhead console housing. Be certain that all of the latch features are fully engaged
  2. Connect the intrusion module sensor pigtail wire harness connector (1) to the ITM connector receptacle.
  3. Install the overhead console into the headliner. Refer to CONSOLE, OVERHEAD, FRONT, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an intelligent battery sensor (ibs), connect the ibs connector.
scientia non olet · About LEMON Manuals