LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Installation >> 5.7L

Heater, Engine Block: Installation: 5.7L

GC0143810Courtesy of CHRYSLER GROUP, LLC
  1. Thoroughly clean cylinder block core hole and block heater seat.
  2. Insert block heater assembly (2) into the block.
  3. With block heater fully seated, tighten bolt (3) to 12 N.m (106 in. lbs.) torque.
  4. Connect power cord to block heater (2).
scientia non olet · About LEMON Manuals